By possessing an understanding of Newtonâ€™s Laws, following these three laws of

graphical solutions, and understanding vector algebra you can solve most

engineering static problems. Systems of Force Systems of force acting on objects

in equilibrium can be classified as either concurrent or nonconcurrent and as

either coplanar or noncoplanar. This gives us four general categories of

systems. The first category, concurrent-coplanar forces occur when the lines of

action of all forces lie in the same plane and pass through a common point.

Figure 1 illustrates a concurrent-coplanar force in such that F1, F2, and W all

lie in the same plane (the paper) and all their lines of action have point O in

common. To determine the resultant of concurrent force systems, you can use the

Pythagorean theorem, the law of sines, or the law of cosines as outlined in the

previous chapter. Nonconcurrent-coplanar force is when the lines of action of

all forces lie in the same plane but do not pass through a common point as

illustrated in figure 2. The magnitude and direction of the resultant force can

be determined by the rectangular component method using the first two equations

in figure 2, and the perpendicular distance of the line of action of R from the

axis of rotation of the body can be found using the third equation in figure 2.

Concurrent-noncoplanar forces are when Application the lines of action of all

forces pass through a common point and are not in the same plane. To find the

resultant of these forces it is best to resolve each force into components along

three axes that make angles of 90 degrees with each other.

Nonconcurrent-noncoplanar forces are when the lines of action of all forces do

not pass through a common point and the forces do not all lie in the same plane.

Stress When a restrained body is subject to external forces, there is a tendency

for the shape of the body.